DL1TXV2
Internal Battery:
Average consumption: 320mAh.
Voltage: 3.7V | 4.2V at full load.
Capacity: 5000mAh.
Cells: 1.
Type: Lithium Polymer.
Approximate duration: 14h.
General:
Dimensions: 120 x 102 x 30mm.
Box: PLA plastic.
Fiber or aluminum base: It has 4 threaded brass inserts of M3.
Weight: 250g appox. (Without antenna).
IP Protection: IP30.
Temperature Range: -20º to +55ºC.
DL1RXV2
Power Supply:
Voltage: 5V. Min 4.5V. Max 6Vdc. (To work or do tests, don’t power the device via USB.)
Consumption: Standby 70mA.
Max consumption: TX(500mW) 540mA @12mS.
General:
Dimensions: 70.78 x 35.75 x 14.78mm.
Box: PLA plastic.
Fiber base: 4 holes for M3 screws.
Weight: 30g (Without antenna). | 47g (With 5dbi omnidirectional antenna.)
DL1V2 system, Radio XLRS
Maximum RC and Telemetry range: 250Km LOS, RX 5dBi with omnidirectional antenna and TX with directional antenna 9dBi (BQ89, MX433, Yagui…). @50kb. | To obtain the maximum range of the system, a SATPRO tracker antenna is necessary.
Encryption: AES128 bits.
Max Power:
CE: 500mW (+27dBm).
FCC: 500mW (+27dBm).
Custom: 1000mW (+30dBm).
Max Sensitivity:
-110dBm @50Kb (500mW).
-116dBm @50Kb (1000mW).
RF Bands: ISM 433, 458, 863, 866, 868, 902, 915, 955Mhz. Configurable.
Standards: CE (Europe), FCC (America), ARIB (Japan), ETA (India).
IEE 802.15.4g ETSI EN 300 220, EN 54-25, FCC CFR47 Part 15, Part 90, ARIB STD-T30, T67, T108.
Frequency: From 863Mhz to 950Mhz or 433Mhz to 458Mhz. (Optional: 430Mhz).
CE: 869.4Mhz – 869.65Mhz.
FCC: 902Mhz – 927.5Mhz.
Custom: 433Mhz, others…
Multiband:
DL1RX-89 or DL1TX-89 : 863, 866, 868, 902, 915, 950Mhz.
DL1RX-43 or DL1TX-43: 433Mhz.
RF Filtering: Digital. Compatible 1.2Ghz, 2.4Ghz and 5.8Ghz video.
Channeling: Configurable 25, 50, 100, 150, 500Khz.
Modulation: 25, 50, 100, 150kb, configurable. 2-GFSK, FHSS.
RSSI: Digital. Calibrated +-1dBm.
Packets: Typical: 40 per second (25msec latency). Configurable 1, 10, 20, 40 packets/sec.
RF module: Radio 5G (WMX5H).
Upgradable / Configurable: With DMDStudio software via micro USB port.